aws v23

TPA fully supports provisioning production clusters on AWS EC2.

API access setup

To use the AWS API, you must:

• Obtain an access keypair
• Add it to your configuration

For example,

[tpa]$ cat > ~/.aws/credentials
[default]
aws_access_key_id = AKIAIOSFODNN7EXAMPLE
aws_secret_access_key = wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

The AMI user should at least have following set of permissions so tpaexec can use it to provision ec2 resources.

ec2:AssociateRouteTable
ec2:AttachInternetGateway
ec2:AuthorizeSecurityGroupIngress
ec2:CreateInternetGateway
ec2:CreateRoute
ec2:CreateRouteTable
ec2:CreateSecurityGroup
ec2:CreateSubnet
ec2:CreateTags
ec2:CreateVpc
ec2:DeleteKeyPair
ec2:DeleteRouteTable
ec2:DeleteSecurityGroup
ec2:DeleteSubnet
ec2:DeleteVpc
ec2:DescribeImages
ec2:DescribeInstanceStatus
ec2:DescribeInstances
ec2:DescribeInternetGateways
ec2:DescribeKeyPairs
ec2:DescribeRouteTables
ec2:DescribeSecurityGroups
ec2:DescribeSubnets
ec2:DescribeTags
ec2:DescribeVolumes
ec2:DescribeVpcAttribute
ec2:DescribeVpcClassicLink
ec2:DescribeVpcClassicLinkDnsSupport
ec2:DescribeVpcs
ec2:DisassociateRouteTable
ec2:ImportKeyPair
ec2:ModifyVpcAttribute
ec2:RunInstances
ec2:TerminateInstances
iam:AddRoleToInstanceProfile
iam:CreateInstanceProfile
iam:CreateRole
iam:DeleteInstanceProfile
iam:DeleteRole
iam:DeleteRolePolicy
iam:GetInstanceProfile
iam:GetRole
iam:GetRolePolicy:
iam:ListGroups
iam:ListInstanceProfiles
iam:ListInstanceProfilesForRole
iam:ListRolePolicies
iam:ListRoles
iam:ListUsers
iam:PassRole
iam:PutRolePolicy
iam:RemoveRoleFromInstanceProfile
kms:CreateGrant
kms:GenerateDataKeyWithoutPlaintext
s3:GetObject
s3:ListAllMyBuckets
s3:ListBucket
s3:PutObject
s3:PutObjectAcl

Introduction

The service is physically subdivided into regions and availability zones. An availability zone is represented by a region code followed by a single letter, e.g., eu-west-1a (but that name may refer to different locations for different AWS accounts, and there is no way to coordinate the interpretation between accounts).

AWS regions are completely isolated from each other and share no resources. Availability zones within a region are physically separated, and logically mostly isolated, but are connected by low-latency links and are able to share certain networking resources.

Networking

All networking configuration in AWS happens in the context of a Virtual Private Cloud within a region. Within a VPC, you can create subnets that is tied to a specific availability zone, along with internet gateways, routing tables, and so on.

You can create any number of Security Groups to configure rules for what inbound and outbound traffic is permitted to instances (in terms of protocol, a destination port range, and a source or destination IP address range).

Instances

AWS EC2 offers a variety of instance types with different hardware configurations at different price/performance points. Within a subnet in a particular availability zone, you can create EC2 instances based on a distribution image known as an AMI, and attach one or more EBS volumes to provide persistent storage to the instance. You can SSH to the instances by registering an SSH public key.

Instances are always assigned a private IP address within their subnet. Depending on the subnet configuration, they may also be assigned an ephemeral public IP address (which is lost when the instance is shut down, and a different ephemeral IP is assigned when it is started again). You can instead assign a static region-specific routable IP address known as an Elastic IP to any instance.

For an instance to be reachable from the outside world, it must not only have a routable IP address, but the VPC's networking configuration (internet gateway, routing tables, security groups) must also align to permit access.

Configuration

Here's a brief description of the AWS-specific settings that you can specify via tpaexec configure or define directly in config.yml.

Regions

You can specify one or more regions for the cluster to use with --region or --regions. TPA will generate the required vpc entries associated to each of them and distribute locations into these regions evenly by using different availability zones while possible.

regions are differents from locations, each location belongs to a region (and an availability zone inside this region). regions are AWS specific objects, locations are cluster objects.

Note: When specifying multiple regions, you need to manually edit network configurations:

• ec2_vpc entries must have non-overlaping cidr networks to allow use of AWS vpc peering. by default TPA will set all cidr to 10.33.0.0/16. See VPC for more informations.
• each location must be updated with subnet that match the ec2_vpccidr they belong to. See Subnets for more informations.
• TPA creates security groups with basic rules under cluster_rules and those need to be updated to match ec2_vpc cidr for each subnet cidr. see Security groups for more informations.
• VPC peering must be setup manually before tpaexec deploy. We recommand creating VPCs and required VPC peerings before running tpaexec configure and using vpc-id in config.yml. See VPC for more informations.

VPC (required)

You must specify a VPC to use:

ec2_vpc:
  Name: Test
  cidr: 10.33.0.0/16

This is the default configuration, which creates a VPC named Test with the given CIDR if it does not exist, or uses the existing VPC otherwise.

To create a VPC, you must specify both the Name and the cidr. If you specify only a VPC Name, TPA will fail if a matching VPC does not exist.

If TPA creates a VPC, tpaexec deprovision will attempt to remove it, but will leave any pre-existing VPC alone. (Think twice before creating new VPCs, because AWS has a single-digit default limit on the number of VPCs per account.)

If you need more fine-grained matching, or to specify different VPCs in different regions, you can use the expanded form:

ec2_vpc:
  eu-west-1:
    Name: Test
    cidr: 172.16.0.0/16
  us-east-1:
    filters:
      vpc-id: vpc-nnn
  us-east-2:
    Name: Example
    filters:
      [filter expressions]

AMI (required)

You must specify an AMI to use:

ec2_ami:
  Name: xxx
  Owner: self

You can add filter specifications for more precise matching:

ec2_ami:
  Name: xxx
  Owner: self
  filters:
    architecture: x86_64
    [more key/value filters]

(By default, tpaexec configure will select a suitable ec2_ami for you based on the --distribution argument.)

This platform supports Debian 9 (stretch), RedHat Enterprise Linux 7, Rocky 8, Ubuntu 16.04 (Xenial), and SUSE Linux Enterprise Server 15.

Subnets (optional)

Every instance must specify its subnet (in CIDR form, or as a subnet-xxx id). You may optionally specify the name and availability zone for each subnet that we create:

ec2_vpc_subnets:
  us-east-1:
    192.0.2.0/27:
      az: us-east-1b
      Name: example1
    192.0.2.100/27:
      az: us-east-1b
      Name: example2

Security groups (optional)

By default, we create a security group for the cluster. To use one or more existing security groups, set:

ec2_groups:
  us-east-1:
    group-name:
      - foo

If you want to customise the rules in the default security group, set cluster_rules:

cluster_rules:
- cidr_ip: 0.0.0.0/0
  from_port: 22
  proto: tcp
  to_port: 22
- cidr_ip: 192.0.2.0/27
  from_port: 0
  proto: tcp
  to_port: 65535
- cidr_ip: 192.0.2.100/27
  from_port: 0
  proto: tcp
  to_port: 65535

This example permits ssh (port 22) from any address, and TCP connections on any port from specific IP ranges. (Note: from_port and to_port define a numeric range of ports, not a source and destination.)

If you set up custom rules or use existing security groups, you must ensure that instances in the cluster are allowed to communicate with each other as required (e.g., allow tcp/5432 for Postgres).

Internet gateways (optional)

By default, we create internet gateways for every VPC, unless you set:

ec2_instance_reachability: private

For more fine-grained control, you can set:

ec2_vpc_igw:
  eu-west-1: yes
  eu-central-1: yes
  us-east-1: no

SSH keys (optional)

# Set this to change the name under which we register our SSH key.
# ec2_key_name: tpa_cluster_name
#
# Set this to use an already-registered key.
# ec2_instance_key: xxx

S3 bucket (optional)

TPA requires access to an S3 bucket to provision an AWS cluster. This bucket is used to temporarily store files such as SSH host keys, but may also be used for other cluster data (such as backups).

By default, TPA will use an S3 bucket named edb-tpa-<aws-account-user-id> for any clusters you provision. (If the bucket does not exist, you will be asked to confirm that you want TPA to create it for you.)

To use an existing S3 bucket instead, set

cluster_bucket: name-of-bucket

(You can also set cluster_bucket: auto to accept the default bucket name without the confirmation prompt.)

TPA will never remove any S3 buckets when you deprovision the cluster. To remove the bucket yourself, run:

aws s3 rb s3://<bucket> --force

The IAM user you are using to provision the instances must have read and write access to this bucket. During provisioning, tpaexec will provide instances with read-only access to the cluster_bucket through the instance profile.

Instance profile (optional)

# Set this to change the name of the instance profile role we create.
# cluster_profile: cluster_name_profile
#
# Set this to use an existing instance profile (which must have all the
# required permissions assigned to it).
# instance_profile_name: xxx

• On this page
• API access setup
• Introduction
• Configuration